Description
The Protector Echo Filtered Fume Hood requires no ducting and is available in 4, 5, 6 and 8 ft widths. Neutrodine® Unisorb Filtration Technology offers comprehensive molecular filtration. eGuard® communication software offers real-time monitoring on the users phone or computer. From a remote location, data such as usage authorization, filter saturation detection, sash position and temperature may be observed and managed. Erlab-proven Neutrodine® Unisorb Filters are the heart of GFH Filtration Technology.
Benchtop models include a fiberglass panelized liner. Models are available for carbon-only, carbon with acid sensor, carbon with formaldehyde sensor, or HEPA-only filtration. Filters are sold separately.
Features
• Eco-Foil™ air foil with aerodynamic Clean-Sweep™ airflow openings
• Cord-Keeper™ Slots on left and right side of air foil
• Removable front and side panels, and front and interior service access panels for access to plumbing and electrical wiring
• By-pass airflow design
• Glacier white powder-coated steel exterior
• Chemical-resistant, fiberglass-reinforced, composite panel liner
• Pre-wired vapor-proof LED lights
• eGuard2 software communication
• Smart control command module with wifi, Bluetooth and ethernet connectivity
• Factory-installed command module, fan button and light button
• Roughing prefilter
• Built-in exhaust fans to maintain 60 fpm face velocity at 16 in. sash opening height
• Sound pressure of <60 dB(A) with sash at operating height and <48 dB(A) with sash closed
• Sensor package for primary filter breakthrough of solvent and acid fumes, laboratory air quality, sash position, and temperature
• Audible/visual alarms for breakthrough detection, temperature 40° C (104° F), fan failure and high sash position opening. At 60° C (140° F), all fans stop
• Single piece, tempered safety glass vertical-rising sash with cable pulley, sash weight and powder-coated aluminum sash handle and tracks with airflow openings. Sash stop at 16 in. sash opening height. Sash opens to 28 in. high for loading
• Factory-prepared for up to four electrical duplex receptacles and eight service fixtures
• 37.5 in. high sightline from the work surface and header panel
• Power cord with plug
• Two pre-plumbed service fixtures for gas and cold water. Components for converting either or both fixtures to air and vacuum are provided. Inlet tubing is not provided
• One pre-wired GFCI electrical duplex receptacle on lower right side, (on 8 ft. models only, an additional pre-wired GFCI electrical duplex receptacle on lower left side)
Required Accessories (Not Included)
• Neutrodine® Unisorb Filters (except HEPA only models which require HEPA filters). Number of filters required is determined by the width of the hood
• Work Surface
• Base Cabinet or Stand
Options Available Include
• HEPA filter
• Sash Opening Wing Reduction Kits
• Region-specific electrical plug configurations
• Service fixtures
Compliance
• SEFA 9, DHIII, SEFA 8, Cabinet Surface Finish Tests, Modified ASHRAE 110, ANSI Z9.5-2011, AFNOR NF-X 15-211, ASTM E84-09C, UL Standard 61010-1, CAN/CSA C22.2 No. 61010-1
Specifications
• Airflow Type: Bypass
• Product Subcategory: General Chemistry
• Air foil Type: Eco-Foil
• Blower Requirements: Integral blower included
• Lighting: LED
• Sash Type: Cable and pulley
• Service Fixtures: 2
• Style: Benchtop
Image(s) are representative of the product group and not necessarily the individual product.