Description
The Ultraseal™ LITE semi-automatic microplate heat sealer from Finneran Porvair processes deep well, shallow well, low profile deep well, filter, and assay plates that conform to the ANSI/SLAS standard format. The Ultraseal™ LITE heat sealer operates using 400W of heating elements that ensure high integrity sealing of almost any type of microplate. With so much available power, sealing times for most polypropylene plates are less than three seconds each. Sealed plates are automatically ejected, from the unit, when the sealing cycle has completed. The compact footprint means that the Ultraseal™ LITE will fit just about anywhere – lab bench or inside a fume hood, if required.
Keypoints:
• Ultraseal™ LITE heat sealer has been designed to seal most types of microplates
• Utilizes various heat seal films and foils to give either permanent or peelable seals for all common microplate material types (polypropylene, polystyrene, polyethylene)
• Sealing times and temperatures are fully adjustable via the control touchscreen
• Fully compatible with ANSI/SLAS standard plates and PCR, if full skirted
• Dual voltage capability, operating on either 110 or 220 VAC supplies without the need for a power transformer
Features and Benefits:
• Desktop semi-automatic heat applied microplate sealing system
• Seals SBS format microwell plates and tubes
• Seals plates of any height from 9 – 54mm
• Temperature range from ambient to 200°C
• Seal time from 10 – 20 seconds (based on a 2 second seal)
• Semi-automated slide operation
• Combined temperature and seal time display
• Light weight system, only 9.2 kgs (20 lbs)
• No compressed air required
• 2 mm, 2.75 mm, 3.5 mm risers included with unit
For Sealing PCR Plates – No Skirt or Half Skirt:
• An adaptor is required to seal plates that have well bottoms protruding past the plate skirt. See accessories
Specifications:
• Power Supply: 115/220 VAC 50/60 Hz
• Power Consumption: 600 Watts Nominal
• Fuse Rating: 5 Amp anti-surge (T5AH 250V)
• Internal Heaters: 4 x 100 Watts (Sealing Plate)
• Dimensions (W x D x H): 181 x 270 x 285 mm (7.125 x 10.63 x 11.22 in.)
• Minimum Plate Height: 9 mm
• Maximum Plate Height: 54 mm
• Maximum Sealing Temperature: 200°C
• Protection: IP20
• Cycle Time (approx.): 10 – 20 seconds (based on a 2 second seal)
Image(s) are representative of the product group and not necessarily the individual product.